I finally have a top. I got the bikini top from Jess for free and i used the front hoop of the old roll cage for the new main hoop. It took a while to grind off all the electrical and sports tape that has been on there for who knows how long.
I used some 2x4 tubing to mount the roll bar to which is then tied into the frame for strength. It is also a good start to build the rest of the bed.
I am going to run a piece of tall angle iron along th bottom to act as a rock slider and it will cover the spot where I cut out the rust.
I got rid of the old, ugly exhaust and had Mesa Muffler run new exhaust run from the manifold back and inside the frame. It is 2.5'' exhaust with a Flowmaster Super 44 .
It is tucked under nice and out of sight
I put new spark plugs, wires, cap and rotor, new coil, a new speedometer, a sending unit and a tranny mount.
I used some 2x4 tubing to mount the roll bar to which is then tied into the frame for strength. It is also a good start to build the rest of the bed.
I am going to run a piece of tall angle iron along th bottom to act as a rock slider and it will cover the spot where I cut out the rust.
I got rid of the old, ugly exhaust and had Mesa Muffler run new exhaust run from the manifold back and inside the frame. It is 2.5'' exhaust with a Flowmaster Super 44 .
It is tucked under nice and out of sight
I put new spark plugs, wires, cap and rotor, new coil, a new speedometer, a sending unit and a tranny mount.
No comments:
Post a Comment